Dealer Locator
About Us Blog Inspiration Support Trade & Wholesale

Which Cartridge Does My Strom Faucet Need?

When a Strom Living faucet starts to drip, or a handle feels stiff, the fix is usually a new cartridge, not a new faucet. Our faucets use quarter-turn ceramic disc cartridges, and the right one depends on three things: the kind of faucet you have, the style of its handles, and its finish.

1. Find your faucet type

The cartridge follows the faucet body, not the model name:

Your faucet Hot & cold Diverter
Tub faucets with the round 3-ball body (P0006B) PP0106Q pair PP0106DQ
British telephone tub faucets (P0146 body) PP0245 pair PP6502Q
Bridge faucets PP0106Q pair (P1063 and P1064: PP0106Q45)
Widespread lavatory faucets PP0110P / PP0111P, sold one at a time
In-wall tub & shower sets PP0268 / PP0272 PP0104-1
Thermostatic showers and tub faucets: the temperature handle PP0298-1 for valves made after September 2009
Thermostatic sets with one diverter handle, that send water to the shower head or the handshower, like the P1085 PP0297D-1
Thermostatic sets with a separate on/off handle for each outlet, so both can run at once, like the P0902 PP0297 shut-off cartridge, one per on/off handle

2. Check your handles: cross or lever

Cross handles and lever handles turn in opposite directions, so we set each cartridge to turn the right way for your handle. That's why every cartridge asks for your handle style when you order.

  • Cross handles (four spokes): a widespread lavatory faucet takes two PP0110P cartridges.
  • Lever handles (a single arm): it takes one PP0110P for the hot side and one PP0111P for the cold side.

3. Match the finish

Part of the cartridge shows under the handle, so choose the same finish as your faucet. Each cartridge page lists the finishes it comes in.

Thermostatic valves: check the year

PP0298-1 fits thermostatic valves made after September 2009. If your valve is older, contact us and we'll find the right part. Our thermostatic valve maintenance guide shows how to keep it working smoothly.

Bought before 2005?

Faucets from before 2005 used stem cartridges, and we've since changed to ceramic discs. Contact us first so we can send the right part.

Still not sure?

Send a photo of the faucet and its handles through our contact page, or use the cartridge finder. Our cartridges are made for Strom Living faucets and aren't meant for other brands. Parts ordered before 12 PM Pacific usually ship the same day.

Previous Post Next Post

Related Posts

Strom Living Lagoon cast iron double ended pedestal tub

How Much Does a Cast Iron Tub Weigh?

Cast iron is what makes a clawfoot tub feel so solid, and it's heavy. Most cast iron tubs weigh between about 350 and 500 pounds empty, depending on size and style. Our cast iron tubs, empty Tub Empty Crated for shipping Mendocino 5' clawfoot 352 lb 520 lb Como 5' leg tub 352 lb 520 lb Charles 5' rectangular leg tub* 404 lb 515 lb Lewis 5.5' rectangular leg tub* 437 lb 559 lb Michigan 5' pedestal 460 lb 593 lb Lagoon 5.5' pedestal 475 lb 635 lb Luna 6' pedestal 506 lb 640 lb * Includes its feet, about 30 lb. Our pedestal tubs weigh more than the ones on feet. Full of water Water weighs about 8.3 pounds a gallon. The Lagoon holds about 45 gallons, so the water alone adds around 375 pounds. Add the tub and a person, and a filled cast iron tub can weigh close to half a ton, spread across just four feet or one pedestal. Before it arrives Check the floor. Ask a contractor to check the floor where the tub will sit, especially in an older home or an upstairs bathroom. Plan the route. Measure doorways, stairs and turns from the street to the bathroom against the tub's size. Line up help. The crated weight is what arrives at your door. Have enough people, or a mover, to carry it in safely. Cast iron or acrylic? Most of our acrylic tubs weigh between about 70 and 150 pounds empty, a third of cast iron or less, which makes them easier for upstairs bathrooms. Cast iron holds heat longer and has a heavy, solid feel. Our cast iron vs acrylic guide compares them in full, and clawfoot tub sizes helps you check the fit. Browse cast iron tubs and acrylic tubs, or ask us about a specific model's weight.

Strom Living P0007 chain and stopper waste and overflow tub drain

Clawfoot Tub Drains: Chain and Stopper, Lift and Turn, or Toe Touch

On a clawfoot tub the drain is out in the open, so it's part of the look. It's called a waste and overflow: a drain at the bottom of the tub, an overflow near the top, and the pipe that joins them to your floor. Three ways to close it Chain and stopper. The classic: a plug on a chain. Lift and turn. A stopper in the drain that you lift and twist to open or close. Toe touch. Press the stopper with your foot to close it, press again to open. Our P0007 waste and overflow drain comes in all three; you choose the type when you order. It fits most leg tubs made from 1900 on. The measurements that matter Waste from the T: 12" Overflow from the T: 16" Drain and overflow flange: 3" Floor escutcheon: 2.5" across Measure your tub's drain and overflow before you order, and match the finish to your faucet and feet. Freestanding acrylic tubs Some freestanding acrylic tubs, like our Seneca, come with an integrated drain. Check the tub's specifications before buying a separate one. Keeping it working Washers and seats wear with normal use, and that's the most common cause of a leaking drain. A washer repair kit fixes it without replacing the drain. We also sell the chain and stopper set, the lift and turn part, a 1 1/2" × 24" waste tube and overflow brackets. See all tub drains and drain parts, or send us a photo if you're not sure what fits.

Strom Living P0902 exposed thermostatic shower with hand shower

Thermostatic Shower Valves: How They Work and Why They're Worth It

You've felt it: someone flushes a toilet and the shower turns cold, or hot. A thermostatic valve is built to stop that. What a thermostatic valve does Inside the valve is a thermostatic cartridge. It mixes the hot and cold supply and holds the water at the temperature you set, so the shower stays steady instead of swinging hot or cold. Thermostatic vs a standard valve Most standard showers use a pressure-balance valve, which keeps the ratio of hot to cold steady when water pressure changes. A thermostatic valve responds to the temperature of the water itself. It also separates temperature from flow, so you set the temperature once and turn the water on and off with its own handle. Exposed thermostatic showers On our exposed systems the valve and pipes sit on the wall, so they're part of the look. For example: The P0902 has separate controls for the overhead shower and the hand shower, so both can run at once. The P1085 uses a 3-function diverter to switch between them, with a shepherd's crook shower arm. The Sacramento P1131 has adjustable centers to suit more plumbing layouts. Our exposed systems such as the P0902 and P1085 mount on 7" centers and use water-saving 1.75 GPM shower heads. See all thermostatic exposed showers. The same kind of valve also comes in thermostatic tub faucets and clawfoot tub shower sets. Looking after it Our thermostatic valve maintenance guide shows the routine, and which cartridge does my faucet need lists the replacement parts if one ever wears out.

×