Clawfoot and freestanding tubs come in a handful of standard lengths, but width, height and shape change how a tub feels and how much room it needs. Here's what the numbers mean, using our own tubs as examples.
Length: 5', 5 1/2' or 6'
| Length | Good for | Our examples |
|---|---|---|
| 60"–61 1/2" | Smaller bathrooms; the classic size | Huron, St. Claire, Madrone, Como |
| 65"–67" | A longer soak without a huge footprint | Seneca, Arcadia, Lewis, Lagoon, Austin |
| 71"–72" | Tall bathers, or two people | Great Lake, Echo, Summit, Luna |
Width and height
Our tubs are 28 1/2" to 34 1/2" wide. Height depends on the shape: a double-ended tub, with the drain in the middle and both ends sloped, stands about 24" tall. A slipper tub raises one end (single slipper) or both ends (double slipper) for a reclining back, and stands about 26" to 33 1/2" at its highest point.
Depth and capacity
Soaking depth runs from about 15" to 18 3/4" across our tubs, and capacity from 31 to 68 gallons. Deeper isn't always better: a bigger tub takes longer to fill and needs a larger water heater to fill it hot.
Will it fit?
- Measure the room, then leave space around the tub to clean behind it and reach the faucet.
- Measure the way in. The tub has to fit through every door, hallway and stair turn on its way to the bathroom.
- Find the drain. Note where your existing drain sits, and choose a tub and position that line up with it.
- Choose the faucet with the tub. Drilled tubs take a rim-mount faucet; undrilled tubs take a wall or floor-mount one. See how to choose a clawfoot tub faucet.
See every one of our tubs side by side in the bathtub chart, or browse all tubs.

